ENGIE Fabricom sponsor Healing School for Formula 24 event

By | awards | No Comments

ENGIE Fabricom is proud to announce that they will be sponsoring Healing School in this weekends Formula 24 race in Hull.

The sponsorship agreement will help allow Healing School fund for improvements on their car to ensure that it is competitive and built to a high standard.

Local races are to be held in Hull as part of the City of Culture celebrations at the KCOM Stadium in Hull on Sunday 16th July 2017. The first race will commence at 11:45am.

Formula 24 gives pupils the opportunity to design, build and race an electric car. Pupils from Healing School have been involved in all aspects from building the car to marketing the project and attracting sponsors.

The nationwide project is run by Greenpower Education Trust, whose objective is to advance education in the subjects of sustainable engineering and technology to young people.

Andrew Mitchell, Strategic Development Director for ENGIE Fabricom, commented: “ We are delighted to sponsor Healing School with the Greenpower Formula 24 race. The pupils have worked very hard throughout the project and it is great to see young people getting involved with engineering at such an early stage in their lives, as well as being able to utilise the facilities at CATCH to build the cars.

“We would like to commend all of the pupils involved within the project as well as the teachers that have helped guide them throughout. We would like to wish everyone at Healing School all the best for the race on Sunday”.

Sam Horner, Assistant Principal at Healing School, added: “I’ve really enjoyed watching the pupils take on this challenge. They have had to apply for the role formally through application forms and interviews before proving their worth by working as a team with some taking on Team Leader roles. These roles have been varied including marketing, journalism, designing, building as well as racing the car and maintaining it through the upcoming race. All pupils have stepped up to the mark and have shown how well they are at working within a team as well as to very short deadlines. It’s also been great to have the support from so many of our local businesses as this is a great way to form links between the schools and local companies so we can work together in the future. I am extremely proud of all the pupils and fingers crossed for a successful weekend.”

Pupils from Healing School were asked why they applied to be part of the project.

Ben Newton (Y8):

I would like to go and work on the refineries as I enjoy this and it is a very interesting career choice for me. I would like to achieve this by getting an apprenticeship at HCF CATCH and working on a project like this will help me and give me really good, relevant experience.

Renee Purdam (Y9):

Because I would like to be an engineer when I grow up, and I thought it would be a good way and opportunity to find out more about engineering. I’ve really enjoyed building the car as it’s something I really want to get involved in in the future.

Carly Potter (Y10):

Engineering is a career I’m really interested in both in terms of designing and building a car to race but also in my role as the Team Leader for the logo. I’ve really enjoyed all the activities and gained lots of valuable experiences and I take great pride knowing that everyone is going to see our logo and I helped design that.


Healing School Formula 24

Pictured: Thomas Hughes

Healing School Formula 24

Pictured: Chloe Bentley


ENGIE Fabricom partner with Method Functional Safety Ltd. to deliver TUV Certified IEC 61511 Functional Safety Training Course

By | awards | No Comments

ENGIE Fabricom is pleased to partner with Method Functional Safety Ltd. to deliver their TUV Functional Safety Training Course IEC 61511 for Professionals.

The course provides an overview of the entire IEC 61511 lifecycle and details how key aspects such as Verification, Validation, Functional Safety Assessments and Audits can be practically implemented.

The course is universally recognised as the essential qualification for professionals and engineers working with any aspect of the Functional Safety lifecycle in the Process and Power industries.

On successful completion of the course and the examination, candidates that can demonstrate adequate level of experience will achieve the “TUV Functional Safety Professional” award. Certification takes place in cooperation with TUV SUD.

The Course is structured over 3 days of class room training, with a 4-hour exam on the 4th day.

ENGIE Fabricom will be hosting this training event at their Engineering Office, Origin Way, Europarc, Grimsby.

Simon Lewis, Consultancy Manager for ENGIE Fabricom, said “Functional Safety is a key part of our Consultancy Business and high on the agenda of many of our clients. It is great that this course can now be offered within the local Humberside region.”

Dil Wetherill, Managing Director for Method Functional Safety Ltd. added “We would like to thank our hosts for the opportunity to hold our training event at ENGIE Fabricom in Grimsby and look forward to delivering and sharing our knowledge in Functional Safety to an ever growing audience”.


Date: July 17th – July 20th 2017

Cost: £2050.00 + VAT per delegate

Location: ENGIE Fabricom, Origin 3, Origin Way, Europarc, Grimsby, Lincolnshire, DN37 9TZ

For more information:

ENGIE Fabricom LogoMethod Logo

ENGIE Fabricom to exhibit at the NEPIC Meet the Members Conference & Exhibition 2017

By | awards | No Comments

ENGIE Fabricom will be exhibiting at this years’ NEPIC Meet the Members Conference & Exhibition at Wynyard Hall, Billingham, Teesside.

ENGIE Fabricom is uniquely positioned within the engineering, procurement and construction market to provide end to end solutions by combining high level engineering skills with a wealth of construction expertise. This ensures that constructability and risk are understood and continouous throughout all the project stages from Concept through to FEED into Detailed Design and Procurement through to Construction and Commissioning.

Now in its 7th year, and attracting more than 500 delegates, NEPIC’s annual Meet the Members Conference & Exhibition is the stand out event for the North East region.

Ron Ellis, Sales Director and Andrew Harris, Engineering Manager will be representing ENGIE Fabricom for the duration of the event from 8:30am – 4:00pm, June 21st 2017.

We would be delighted to welcome you at our stand which is located at position number 61, near the Networking Zone.

For further information and to book tickets to the NEPIC Meet the Members Conference & Exhibition 2017 visit:

View our other stories

Professionalism  ■  Integrity  ■  Trust  ■  Team Spirit

Safety Behaviour Observation (SBO) Award for Neil Hagger

By | awards | No Comments

Neil Hagger, Rigger and Steel Erector for ENGIE Fabricom has been awarded an SBO award by M+W Group while working on the Energy Works Hull, Waste to Energy site.

Neil noticed that a grouting operative was using a scabbler and not wearing any goggles or visor, which could have resulted in small fragments of grout damaging his eyes. Neil explained to the grouter the importance of wearing the correct PPE and that a visor or goggles would be more appropriate.

Matt Welch, HSE Advisor commented: “It is great to see the contribution to site safety that ENGIE Fabricom is making and this is an example of where we can all use our own experience to the benefit of others.”

View our other stories

Professionalism  ■  Integrity  ■  Trust  ■  Team Spirit

Busy Summer ahead for ENGIE Fabricom’s Engineering & Design group at Prospect House, our new base in Teesside

By | awards | No Comments

ENGIE Fabricom has been awarded a Front End Engineering Design contract by a specialist chemicals company to expand their AMD production plant in the Netherlands. This follows on from an AMD project at their Bradford site; with our knowledge and the continued relationship between both companies being a significant reason in receiving the contract.

The project scope includes the design and installation of plant and equipment to facilitate the manufacture of their products by a new synthesis route.

This FEED contract started in March 2016 and is due to be completed later in the Summer. The ENGIE Fabricom project team has already successfully delivered the P&IDs which is the first project milestone. Andrew Harris, our Engineering Manager at the new office in Stokesley commented; “This is a good start to the project which should enable ENGIE Fabricom to deliver the FEED package on time, and ensure the client can maintain its overall project schedule, through EPC and Commissioning.”

The project is currently being fully executed from Stokesley, including all engineering disciplines; Process and Process Safety, EC&I, Mechanical & Piping, Civil & Structural. In addition to this FEED project, our consultancy, engineering, and design team at Prospect House have been undertaking HAZOP studies and process piping design work for local clients within Teesside.

The project team for the current FEED contract includes; Andrew Harris (Engineering Manager), Rhys Begley (CAD Design), Pascal Pehma (Senior Process Engineer), Joe Ellerton (Mechanical & Electrical Engineering Manager) and Dean Revill (EC&I Engineer).

Professionalism  ■  Integrity  ■  Trust  ■  Team Spirit

Certificate of Achievement for Jonathan Charles on the Nuclear Training Program for Junior Engineers

By | awards | No Comments

Jonathan Charles, Graduate Process Engineer at Engineering Solutions has successfully completed the ‘Nuclear Training Program for Junior Engineers’ conducted by ENGIE.

The program initially entails one year of training, combining theoretical learning with field experience. Technical modules include: safety/security, nuclear safety, radiation protection, nuclear fundamentals, fuel cycle, pressurised water reactors, spent fuel management and decommissioning, maintenance of nuclear power plants etc.

These modules are also accompanied by non-technical modules to develop essential skills for those looking to develop into a nuclear manager role with skills such as: communication, human resources, management behaviour all on the curriculum.

The course allows junior engineers to become a nuclear generalist while forging a solid network within the group.

Jonathan commented “The course was extremely beneficial for those looking to develop further knowledge within the nuclear field and provided an overall background to the industry.  I would definitely recommend the program to others interested in this field.  The program also enabled me with a platform to learn more about the ENGIE Group and the opportunity to develop connections amongst the other ENGIE subsidiary companies.”

On behalf of all within the group we would like to congratulate Jonathan on his achievement.

Pictured L to R: Anne-Emmanuelle Semin (Senior HR Talent Manager), Jonathan Charles (Graduate Process Engineer) Laurence Bouquet-Durupt (HR Director)

Professionalism  ■  Integrity  ■  Trust  ■  Team Spirit

Rebecca Steedman Awarded Certificate in Project Controls

By | awards | No Comments

Congratulations to Rebecca Steedman, Project Services Administrator at ENGIE Fabricom, for successfully completing her Project Controls programme.

The course, which is delivered in association with the ECITB, is a comprehensive programme covering all aspects of project controls spread across 8 modules.  Delivered over a 9 month period, the course concludes with a presentation to employers which was attended by Andy Hills and Mark Wingate.  Each module has three assessments which are designed to encourage the learner to find out more about how their own company carries out the aspects of project control that they are learning about and share experiences and best practice.

Andy Hills, Senior Project Services Manager for ENGIE Fabricom, commented “Rebecca has studied hard to complete this programme over the course of 2015.  Her studies have helped her to consolidate her existing capabilities whilst also developing new skills which will be of great benefit to both Rebecca personally and to us as a business moving forward. Well done Becky!”

On behalf of everyone at ENGIE Fabricom, we would like to pass on our congratulations to Rebecca for completing her course and being awarded the ECITB Certificate in Project Controls.

Professionalism  ■  Integrity  ■  Trust  ■  Team Spirit

Certificate of Achievement for Muhammad Musa

By | awards | No Comments

On behalf of everyone at ENGIE Fabricom we would like to congratulate Muhammad Musa on achieving Chartered Engineer Status awarded by the IChemE.  This is a great personal achievement for Muhammad; Chartered Engineer status is an internationally recognised and respected mark of competence and demonstrates commitment to the engineering profession.

Muhammad commented “I’d like to say a big thank you to all the ENGIE Fabricom staff (especially Richard Hay and Stephen Groves) who guided me on my path to achieving a chartered status.  I would also like to encourage other engineers in the company to try and achieve the same, and to draw on the experience of others in the organisation who can give them the much needed support.”

Simon Lewis added “With Muhammad studying abroad, he has had to overcome many obstacles on his way to becoming a Chartered Engineer.  It is a great achievement for Muhammed to now be able to put CEng after his name, and very well deserved.  Well done Muhammad.”


Professionalism  ■  Integrity  ■  Trust  ■  Team Spirit

Contact Us

If you have any questions about our website or any of our services

Contact Us

Phone: +44 (0) 333 207 4411

All content © 2018 ENGIE Fabricom UK Limited. No reproduction without permission.
ENGIE Fabricom UK Limited, Origin Three, Origin Way, Europarc, Grimsby, DN37 9TZ. No. 1189290